Did you know that it takes very little to extend the life expectancy of your multihead weigher?
Although they have an important function, dust filters are often neglected. They filter dirt and dust from the environment and bring clean air for cooling the electronic parts inside the weigher.
With time, the air filter gets clogged with dirt and dust, diminishing the amount of air that can permeate.
Clogged filters lead to irreparable damage
With time, the air filter gets clogged with dirt and dust, diminishing the amount of air that can permeate. This impairs the required cooling of the machine’s interior. The result is an unavoidable disruption in the machine’s performance and damage to all electronic components and control elements located inside the machine. In more than 84% of the cases, an insufficient cooling of the weigher is the actual cause of defective command units and boards.
In more than 84% of the cases, an insufficient cooling of the weigher
is the actual cause of defective actuator units and boards.
The replacement of the dust filter is urgently recommended for all SIGMA multihead weighers
This applies to the multihead weighers weighing dry as well as frozen products, salad and meat. The dosing weighers that can be used for so-called waterproof applications are even equipped with two filters. This is to ensure the cooling of the electronic parts on the one hand, and to remove moisture and condensation water from the machine’s interior on the other. Condensation water inside a weigher can have drastic consequences: inaccurate weighing results, damage to the IO-boards, rust, defective actuator units, to name just a few. The gravest one, however, is short-circuiting! The cost of the ensuing repairs is very high and can be avoided with so little effort.
We therefore urgently recommend the exchange of the dust filters and the axial fans of all SIGMA multihead weighers twice a year. With minimal effort, you can avoid extensive and costly repairs!
The replacement of the dust filter is urgently
recommended for all SIGMA multihead weighers.
Original dust filter set for weigher
This Yamato dust filter set is suitable for all multihead weighers of the SIGMA series
Spare Parts number:
- SA45927A0001 for Part 1
- SA45417A0003 for Part 2
To make things easier, the entire set consisting of the axial fan, the grid cover, and the dust filter comes
pre-assembled. The required fixing screws are also included.
The exchange by our service technician takes less than an hour!
This way you will avoid inaccuracy in your weighing results, disruption in the running of your machine and irreparable damage to its electronic parts.
Manager Technical/Customer Service
In case of further questions, we will be happy to assist you.
Our consulting team comprises experienced techinicians and competent members of our Spare Parts team,
all readily available to advise you on the dangers of clogged air filters.
Do not wait any longer!
„…These recommendations are based on 30 years of experience at Yamato Scale…“
Topics in this article
Dust Filter, Axial Fan, Multihead weighers, Multihead Scales, Automatic Multihead Equipment, Automatic Dataweigh, Computer Combination Weighers, Industrial Weighers, Dynamic Weighing Systems